FAQ
General Information
Where can I obtain a catalog?
You may obtain an FNH USA catalog in a couple of ways:
-
Do you give tours of the FN factory?
We do not offer tours of the factory at this time.
-
Can I buy a firearm from FNH USA directly from the factory?
In compliance with federal, state and local laws, FNH USA does not sell firearms or ammunition consumer direct. FNH USA firearms must be purchased through your local FNH USA retail dealer. To find a dealer who stocks FNH USA firearms, please user our dealer locator service, which is located on our website here.
-
Where can I get parts for my FNH USA firearm?
FNH USA parts are distributed by the FNH USA Service center. Contact them at 800-635-1321.
-
How can I locate an FNH USA firearm dealer near me?
Use the FNH USA Stocking Dealer Locator. Enter your zip code and you’ll get a list of the FNH USA dealers closest to you.
-
How can I obtain an instruction manual for my FNH USA firearm? Will FNH USA replace the one I lost?
FNH USA has many of our owner’s manuals available online here.
If you do not find the manual you need available for download, or if you prefer a printed version of an owner’s manual, please contact FNH USA Customer Support via telephone 855-5FNHUSA (855-536-4872) or email customerservice@fnhusa.com
-
What is the life expectancy of my FNH USA firearm?
With careful use, regular cleaning and proper maintenance, your FN firearm should provide you with years of trouble-free service.
-
What is my FNH USA firearm worth today?
The value of any FNH USA firearm, like all consumer products, is dependent on many factors such as its age, condition, scarcity, current market demand, etc.
To find out the approximate value of your FNH USA firearm, you may consult a reliable reference book like the current edition of the Blue Book of Gun Values (www.bluebookinc.com). You may also consult one or more of the major firearms periodicals like Shotgun News or Gun List, or you can visit one of the numerous used firearm sales websites online. You may also have your FNH USA firearm appraised by your local FNH USA dealer or by a reputable firearms appraiser. They are often listed in your local telephone directory.
-
Why does my FNH USA owner’s manual recommend that I do not use reloaded ammunition?
FNH USA cannot guarantee that the reloaded ammunition you want to use meets industry specifications established by the Sporting Arms and Ammunition Manufacturers’ Association (SAAMI) or the Permanent International Commission for Firearms Testing (CIP). Because of this, using reloaded ammunition will void the warranty on your FNH USA firearm.
-
Is my gun (is the gun I am interested in purchasing) available in my State?
State laws can and do change quickly and regularly. FNH USA is currently working on a list of regulations regarding our products but we do not have anything available at this time. We always suggest you contact your local gun shop for more information on state regulations. The following link should help you address your specific question: http://www.lcav.org/content/state_local.asp
-
I purchased an FNH USA firearm for a specific use, and now I think I bought the wrong model. Can I exchange it with FNH USA for a different model?
Because FNH USA does not sell direct to consumers, FNH USA cannot offer exchanges on firearms. Consult with the retail dealer where you purchased the firearm regarding their exchange/return policy.
-
How do I register my FNH USA firearm for warranty?
No warranty registration for your FNH USA firearm is required.
-
Does FNH USA offer gun safety or shooting classes for civilians?
FNH USA does not offer civilian firearms training at this time. We suggest that you contact a reputable training organization like the National Rifle Association (www.nra.org) or the National Shooting Sports Foundation (www.nssf.org). Your local FNH USA retailer may also help you locate other reputable firearms safety training resources available in your area.
-
Where can I find a holster to fit my FNH USA firearm?
Many of the major holster manufacturers produce high-quality products suitable for FNH USA firearms; visit their websites or review their catalogs to find a holster that is suitable for your needs. FNH USA also carries a limited array of holsters on their estore; please visit the FNH USA estore for more information.
-
I am a Law Enforcement Officer, and I have questions about my duty/off-duty firearm. Whom should I contact?
If you are looking for a new or replacement firearm, please contact FNH USA’s distributor for Law Enforcement, OMB Guns (www.ombguns.com). If you have a question that is specific to your current firearm, please call FNH USA directly via their custom service toll-free number 855-5FNHUSA (855-536-4872) or email customerservice@fnhusa.com.
-
Where can I find your current promotions?
Current active promotions can be found on our website here.
-
Where can I find FNH USA advertising?
FNH USA maintains its current and active advertising on the website. For the latest print ads, follow here.
For the latest videos, please go here.
-
I am a dealer. Do you have any discount or training programs for dealer staff, such as ProStaff?
FNH USA has a web-based program that instructs dealers and dealer staff on FN products. Once dealer employees pass the quizzes, they become eligible for pro-staff discounts on FNH USA firearms and FNH USA soft goods. Please visit http://www.3point5.com/fnhguns for more information and details.
-
What programs do you have for active military and/or for military families?
FNH USA is proud to support our active and inactive military and their families. FNH USA has partnered with the National Rifle Association to support its Life of Duty of Program www.nralifeofduty.tv/#/home. The program provides assistance and support to military and their families. For every gun you purchase from FNH USA, the company will donate $2 to Life of Duty. You can also elect to ‘round up’ your purchase on the FNH USA estore to the next dollar. The difference in change is donated to Life of Duty.
-
I am a writer/photographer. I would like to request a firearm for testing and evaluation. How do I request a firearm from FNH USA?
FNH USA supports the efforts of media by supplying them with a ‘loaner’ firearm for testing and evaluation. Please visit our website to learn more about the Testing and Evaluation Program, or you may send an email to media@fnhusa.com.
Specific Firearm Questions
HANDGUNS
FNS-9 Series Handguns
-
What is the twist rate of the FNS-9mm barrel?
The FNS- 9 has a 1 in 10-inch RH twist rate. For more details, please go to the specifications section of the FNS-9 model page of FNH USA website here.
-
What are the dimensions of the FNS-9?
The FNS- 9 has a 4” barrel, an overall length of 7.25 inches, weighs 25.2 oz empty, and has a 17-round magazine capacity. For more details, please go to the specifications section of the FNS-9 model page of FNH USA website here.
-
What comes with the FNS-9 handgun?
With your purchase of a FNS-9 pistol, you receive the firearm, two interchangeable back-straps, three (3) 17-round magazines), a fired cartridge (required by law), owner’s manual, locking device, and a lockable fitted polymer hard case. For more details, please go to the specifications section of the FNS-9 model page of FNH USA website here.
-
What type of ammunition should I use in my FNS-9?
FNS-9 handguns are chambered for the 9mm cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. 9mm ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun.
FNS-40 Series Handguns
-
What is the twist rate of theFNS-40 barrel?
The FNS-40 has a 1 in 16-inch RH twist rate. For more details, please go to the specifications section of the FNS-40 model page of FNH USA website here.
-
What are the dimensions of the FNS-40?
The FNS-40 has a 4” barrel, an overall length of 7.25 inches, weighs 25.2 oz empty, and has a 14-round magazine capacity. For more details, please go to the specifications section of the FNS-40 model page of FNH USA website here.
-
What comes with the FNS-40 handgun?
With your purchase of a FNS-40 pistol, you receive the firearm, two interchangeable back-straps, three (3) 14-round magazines), a fired cartridge (required by law), owner’s manual, locking device, and a lockable fitted polymer hard case. For more details, please go to the specifications section of the FNS-40 model page of FNH USA website here.
-
What type of ammunition should I use in my FNS-40?
FNS-40 handguns are chambered for the 40 S&W cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. .40 S&W ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun
FNX-9 Series Handguns
-
What is the twist rate of the FNX-9 barrel?
The FNX-9 has a 1 in 10-inch RH twist rate. For more details, please go to the specifications section of the FNX-9 model page of FNH USA website here.
-
What are the dimensions of the FNX-9?
The FNX- 9 has a 4" barrel, an overall length of 7.40 inches, weighs 21.9 oz empty, and has a 17-round magazine capacity. For more details, please go to the specifications section of the FNX-9 model page of FNH USA website here.
-
What comes with the FNX-9 handgun?
With your purchase of a FNX-9 pistol, you receive the firearm, three magazines, owner’s manual, locking device, and a lockable fitted hard case. For more details, please go to the specifications section of the FNX-9 model page of FNH USA website here.
-
What type of ammunition should I use in my FNX-9?
FNX-9 handguns are chambered for the 9mm cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. 9mm ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun.
FNX-40 Series Handguns
-
What is the twist rate of the FNX-40 barrel?
The FNX-40 has a 1 in 16-inch RH twist rate. For more details, please go to the specifications section of the FNX-40 model page of FNH USA website here.
-
What are the dimensions of the FNX-40?
The FNX- 40 has a 4” barrel, an overall length of 7.40 inches, weighs 24.4 oz empty, and has a 14-round magazine capacity. For more details, please go to the specifications section of the FNX-40 model page of FNH USA website here.
-
What comes with the FNX-40 handgun?
With your purchase of a FNX-40 pistol, you receive the firearm, three magazines, owner’s manual, locking device, and a lockable fitted hard case. For more details, please go to the specifications section of the FNX-40 model page of FNH USA website here.
-
What type of ammunition should I use in my FNX-40?
FNX-40 handguns are chambered for the 40 S&W cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. .40 S&W ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun.
FNX-45 Tactical Handgun
-
What is the twist rate of the FNX-45 Tactical barrel?
The FNX-45 Tactical has a 1 in 16-inch RH twist rate. For more details, please go to the specifications section of the FNX-45 Tactical model page of FNH USA website here.
-
What is the thread pattern of the FNX-45 Tactical extended barrel?
The barrel end thread pattern is .578x28. . For more details, please go to the specifications section of the FNX-45 Tactical model page of FNH USA website here.
-
What are the dimensions of the FNX-45 Tactical?
The FNX- 45 Tactical has a barrel length of 5.3 inches, an overall length of 7.40 inches, weighs 33.6 oz empty, and has a 15-round magazine capacity. For more details, please go to the specifications section of the FNX-45 Tactical model page of FNH USA website here.
-
What comes with the FNX-45 Tactical handgun?
With your purchase of a FNX-45 Tactical pistol, you receive the firearm and a fitted, soft Cordura® nylon case. . For more details, please go to the specifications section of the FNX-45 Tactical model page of FNH USA website here.
-
What type of ammunition should I use in my FNX-45 Tactical?
FNX-45 Tactical handguns are chambered for the .45 ACP cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. .45 ACP ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun.
FNX-45 Series Handguns
-
What is the twist rate of the FNX-45 barrel?
The FNX-45 has a 1 in 16-inch RH twist rate. For more details, please go to the specifications section of the FNX-45 model page of FNH USA website here.
-
What are the FNX-45 dimensions?
The FNX- 45 has a barrel length of 4.5 inches, an overall length of 7.85 inches, weighs 32.4 oz empty, and has a 14-round magazine capacity. For more details, please go to the specifications section of the FNX-45 model page of FNH USA website here.
-
What comes with the FNX-45 handgun?
With your purchase of a FNX-45 pistol, you receive the firearm, three (3) magazines, owner’s manual, locking device, and lockable fitted hard case. For more details, please go to the specifications section of the FNX-45 model page of FNH USA website here.
-
What type of ammunition should I use in my FNX-45?
FNX-45 handguns are chambered for the .45 ACP cartridge and are compatible with all ammunition loaded to U.S. Industry Standards, including +P and hollow-point loads. .45 ACP ammunition manufactured in accordance with NATO, U.S., SAAMI, or CIP standards is within the design limits and known to function in the handgun.
FN Five-seveN® Series Handguns
-
What is the twist rate of the Five-SeveN® barrel?
The FN Five-SeveN® has a 1 in 9-inch RH twist rate. For more details, please go to the specifications section of the Five-SeveN® model page of FNH USA website here.
-
What are the dimensions of the Five-SeveN®?
The FN Five-SeveN® has a barrel length of 4.8 inches, an overall length of 8.2 inches, weighs 20.8 oz empty, and has a 10 or 20-round magazine capacity. For more details, please go to the specifications section of the Five-SeveN® model page of FNH USA website here.
-
What comes with the Five-SeveN® handgun?
With your purchase of an FN Five-SeveN® pistol, you receive the firearm, three (3) magazines, owner’s manual, locking device, and lockable fitted hard case. For more details, please go to the specifications section of the Five-SeveN® model page of FNH USA website here.
-
Is there a shortage of 5.7x28mm ammunition? Why?
As of October 2012, there is still a shortage of 5.7x28mm ammunition on the U.S. commercial market. The industry has seen an unprecedented spike in demand over the past six months. This was due to a “perfect storm” of media speculation surrounding several federal procurement initiatives coupled with the traditional surge in firearms and ammunition sales prior to major political elections. This spike was difficult to predict and left the two primary manufacturers of the 5.7x28mm round – FN Herstal and Fiocchi – struggling to catch up.
-
Is FN going to stop making the 5.7x28mm round?
As of October 2012, FN Herstal is continuing production of its popular SS195LF round and is moving forward with plans to adjust production in the coming months in anticipation that this high demand will continue into 2013. FNH USA has also been working with Federal Cartridge Company to develop a new SS197 plinking round, which was released in limited quantities to the commercial market in August 2012. Additional quantities of this new round will be released to the market over the next six months.
-
What is FN doing to increase production of their SS195LF round?
Over the past several months, FNH USA management has been working very closely with our parent company, FN Herstal, to both increase production of the SS195LF round and expedite its import into the U.S. and distribution to dealers. As of October, we are expecting three shipments from Belgium over the next six months. The first shipment is currently awaiting approval of an export license and could be on dealer shelves as early as mid-November. Two additional shipments will follow. In the meantime, we are also working with Federal Cartridge Company to release additional rounds of SS197SR currently in reserve. We will release shipment dates for these rounds shortly.
-
When will more 5.7x28mm ammunition be available?
We hope consumers will see an influx of additional rounds of SS197SR and SS195LF to the market sometime in November. Please note that we anticipate demand of 5.7x28mm ammunition to remain high for at least the next year and ask consumers to be patient with us while we baseline the “new normal” and adjust manufacturing quantities accordingly.
-
How can I find 5.7x28mm ammunition?
There are a variety of ways to locate 5.7x28mm ammunition for purchase. First, we suggest you contact your local FN dealer. To find a dealer near you, please visit our website at www.fnhusa.com and type your zip code into the FN Dealer Locator box. If they do not have in stock, we suggest you visit our Facebook page. We have found our loyal FN fans to be the best, most up-to-date source of information about where to purchase 5.7x28mm ammunition, especially for particular areas of the country.
AUTOLOADING SHOTGUNS
FN SLP
-
What are the dimensions of the SLP?
The FN SLP is a 12-Gauge autoloading shotgun with a 3-inch chamber, with an active valve gas system operation. Its barrel is 18 inches; has an overall length of 38.75 inches, weighs 7.7 pounds empty and has a capacity of 6+1. For more details, please go to the specifications section of the FN SLP model page of FNH USA website here.
-
What is the tightest choke I can use with rifled slugs?
Modified (MOD)
-
What piston should I use light or heavy?
The light piston is set for minimum loads of 2 ¾”, 3 dram, 1 1/8th oz and a maximum of 2 ¾”, 3 dram 1 ½ oz. The heavy piston is set for loads in either 2 ¾” or 3” Magnum with a shot charge larger than 1 ½ oz.
-
What type of choke is used on the SLP?
The invector choke system is used on the SLP 18".
-
Can I buy spare barrels for my SLP?
Yes, you can purchase a 22” rifled, 22” smoothbore with cantilever mount (SLP MK I), 24”, 26”, 28” and 30” vent rib smooth bore barrels. Note: all 24, 26, 28 and 30” smooth bore barrels come with a capacity plug.
-
Can I buy spare chokes for my SLP?
Yes you can purchase spare choke tubes for all of our barrels. The 18” SLP barrel uses the invector choke system.
FN SLP MK I
-
What are the dimensions of the FN SLP MK I?
The FN SLP MK I is a 12-Gauge autoloading shotgun with a 3-inch chamber, with an active valve gas system operation. Its barrel is 22 inches; has an overall length of 43 inches, weighs 8.2 pounds empty and has a capacity of 8+1. For more details, please go to the specifications section of the FN SLP model page of FNH USA website here.
-
What is the tightest choke do I use with rifled slugs?
Modified (MOD)
-
What piston should I use light or heavy?
The light piston is set for minimum loads of 2 ¾”, 3 dram, 1 1/8th oz and a maximum of 2 ¾", 3 dram 1 ½ oz. The heavy piston is set for loads in either 2 ¾" or 3” Magnum with a shot charge larger than 1 ½ oz.
-
What type of choke is used on the SLP MK I?
The invector choke system is used on the 22" SLP MK I.
-
Can I buy spare barrels for my SLP MK I?
Yes, you can purchase a 22" rifled, 24", 26”, 28" and 30" vent rib smooth bore barrels.
Note: all 24, 26, 28 and 30" smooth bore barrels come with a capacity plug.
-
Can I buy spare chokes for my SLP MK I?
Yes you can purchase spare choke tubes for all of our barrels. The 22” SLP MK I uses the invector choke system.
RIFLES
SPECIAL POLICE RIFLE [SPR] SERIES
SPR A1, A1a, A3G, A5 and A5M
-
What is the twist rate of the barrel of the SPR rifle?
Please see 'specifications' on the specific SPR model page on our FNH USA website here.
-
What are the dimensions of the SPR rifle?
Please see 'specifications' on the specific SPR model page on our FNH USA website here.
-
What is the recommended torque setting for the actions screws?
65in lbs.
-
What is the accuracy spec for the SPR series?
SPR A3G .5 MOA, SPR 1 MOA with match grade ammo.
-
What type of ammunition should I use with my SPR?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your SPR.
TSR XP Rifles
-
What is the twist rate of the TSR XP barrel?
Please see 'specifications' on the specific SPR model page on our FNH USA website here.
-
What is the recommended torque setting for the actions screws?
65in lbs.
-
What is the accuracy spec for the TSR XP?
1.5 MOA with match grade ammo.
-
What are the dimensions of the TSR XP?
Please see 'specifications' on the specific SPR model page on our FNH USA website here.
-
What type of ammunition should I use with my TSR XP?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your TSR XP.
FNAR
-
What is the twist rate of the barrel for the FNAR?
The FNAR has a twist rate of 1 in 12 inches RH. For more details, please go to the specifications section of the FNAR model page of FNH USA website here.
-
What are the dimensions of the FNAR?
The barrel length is 16 inches, with an overall length of 37-35 ½ inches and weighs between 8.2 and 8.75 pounds when empty. For more details, please go to the specifications section of the FNAR model page of FNH USA website here.
-
What is the accuracy spec for the FNAR?
1 MOA with match ammo.
-
What type of ammunition should I use with my FNAR?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your FNAR.
FN SEMI-AUTOMATIC CARBINES
SCAR® 16S
-
What is the twist rate of the SCAR® 16S barrel?
The SCAR® 16S has a 1 in 7-inch RH twist rate. For more details, please go to the specifications section of the SCAR® 16S model page of FNH USA website here.
-
What are the dimensions of the SCAR® 16S?
Barrel length is 16.25 inches, overall length is between 27.5 inches and 37.5 inches, and weight is 7.25 pounds when empty. For more details, please go to the specifications section of the SCAR® 16S model page of FNH USA website here.
-
What is the tread size on the end of the barrel?
A. ½”x 28 R
-
What type of ammunition should I use with my SCAR® 16S?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your SCAR® 16S.
SCAR® 17S
-
What is the twist rate of the SCAR® 17S barrel?
The SCAR® 17S has a 1 in 7-inch RH twist rate. For more details, please go to the specifications section of the SCAR® 17S model page of FNH USA website here.
-
What are the dimensions of the SCAR® 17S?
The barrel length is 16.25 inches, overall length is between 28.5 inches and 38.5 inches, and weight is 8 pounds when empty. For more details, please go to the specifications section of the SCAR® 17S model page of FNH USA website here.
-
What is the tread size on the end of the barrel?
5/8” x 24 RH
-
What type of ammunition should I use with my SCAR® 17S?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your SCAR® 17S.
PS90 (USG, TR, Standard)
-
What is the twist rate of the PS90 barrel?
The PS90 has a 1 in 9-inch RH twist rate. For more details, please go to the specifications section of the PS90 model page of FNH USA website here.
-
What are the dimensions of the PS90?
The barrel length is 16.1 inches with an overall length of 26.23 inches with a weight of 6.28 pounds empty. For more details, please go to the specifications section of the PS90 model page of FNH USA website here.
-
Is the muzzle break removable?
No, it is permanently attached.
-
What sight options do I have for the PS90?
You can mount your preferred sights directly to the provided 1913 Mil-STD rail or replace the rail with a PS90 USG sight, PS90 Greed Dot Fiber Optic sight or a PS90 Micro Red Dot electronic sight.
FS2000 (Tactical / Standard)
-
What is the twist rate of theFS2000 barrel?
The FS2000 has a 1 in 7-inch RH twist rate. For more details, please go to the specifications section of the FS2000 model page of FNH USA website here.
-
What are the dimensions of the FS2000?
The barrel length is 17.44 inches with an overall length of 29.25 inches with a weight of 7.86 pounds when empty. For more details, please go to the specifications section of the FS2000 model page of FNH USA website here.
-
Is the muzzle break on the FS2000 removable?
No, the muzzle break is permanently attached.
-
Can I use standard M16/AR15 magazines in my FS2000?
Yes, you can use all US GI 30 round magazines that are metal or aluminum. Plastic or polymer magazines should not be used.
-
What type of ammunition should I use with my FS2000?
Only factory ammunition manufactured to U.S. Industry Standards or in accordance with NATO, SAAMI, or CIP standards should be used in your FS2000.
-
Can I replace the sight on my FS2000 Standard?
No, the internal mounting system is specifically designed for use with the FS2000 optical system.
FN 5.7x28mm AMMUNITION
-
What is the velocity of the 5.7x28mm ammunition?
Five-SeveN® – 4.75” barrel Muzzle Velocity (ft/s): SS195LF 1950; SS197SR 1700
PS90 - 16.04” barrel Muzzle Velocity (ft/s): SS195LF 2400; SS197SR 2280
-
Where can I purchase 5.7x28mm ammunition?
The 5.7x28mm ammunition is available through your local firearms retailer or an FNH USA stocking dealer.
Firearm Return and Service Inquiries
-
How do I ship my gun back to the FNH USA Service Department for service?
Please contact our Customer Support Department at 800-635-1321 for complete service instructions. Please DO NOT mail/ship your FNH USA firearm in for repairs without first contacting the FNH USA Service Department for prior authorization.
-
Who do I contact about the status of my firearm that I have sent in for Service?
Please contact our Customer Support Department at 800-635-1321 for complete service instructions.
-
Is there an on-line method by which I can see the status of my firearm repair/service?
Yes, if you have received your postcard from our service department, you may check the status of your firearm here by entering your service number and password.
EStore Questions
- I would like to buy some clothes/collectibles with the FN Logo. Where can I find it?
FNH USA has an estore that sells apparel, range wear, and collectibles. Check out the FNH USA website and look for the “EStore” button, or you can type in www.fnhusaestore.com to go directly to the estore.
- What type of merchandise do you sell at the estore?
FNH USA’s estore merchandise reflects our customers’ desires: we have a range of tee-shirts, polos, long-sleeved shirts. The FNH USA estore carries both fitted and polo hats, cases, various keychains, coins, pins, and stickers. The estore also carries FNH USA firearm accessories, such as slings, shooting mats, and magazines.
- Are there any promotions or discounts available for the estore?
FNH USA will frequently run promotions; you can see the latest promotions featured on the FNH USA website’s homepage.
- I see that an item I want is out of stock. When do you expect it to be back in stock?
The FNH USA estore may have periodic out of stock situations with popular items, and we update the website to indicate which items are not in stock. The estore works hard to maintain inventory, but in the occasions when an item is out of stock, the estore will provide a status update when we know it. So, come back regularly to see any changes in out of stock status.
- I would like to get a status update on an estore order I recently placed. Who do I contact?
Please contact the FNH USA estore customer service. Via email, the estore customer service can be reached at customerservice@forcemultiplierusa.com, or via toll free telephone: (877) 898-7227. If you are calling, please be advised that customer service hours for the estore are 11am – 8pm EST / 8am – 5pm PCT Monday through Friday.
- I don’t see the item I would like to buy on the estore. Where can I provide a suggestion on merchandise FNH USA should offer?
If you have a suggestion or a question about anything you see or experience on the estore, please contact us at customerservice@forcemultiplierusa.com, or via toll free telephone: (877) 898-7227. If you are calling, please be advised that customer service hours for the estore are 11am – 8pm EST / 8am – 5pm PCT Monday through Friday.
|
